iSeries Sony HXR-NX800 PXW-Z200 Camcorder Case
The 3i-2011-10SN was designed to fit the Sony HXR-NX800 or PXW-Z200 Camcorder. The interior of the case is made from high quality EPE foam that holds the camera with or without the battery installed, and features additional space for the BC-U2A battery charger, PTD-FP1 data transmitter, two batteries, and four accessory compartments. The battery slots fit the BP-U35, BP-U70 or BP-U100 (using precut pull-out foam blocks). The accessory pocket measures 1.8” x 1.8” x 1.75” in the upper left of the case, 8.09” x 1.47” x 7.625” in the bottom left, 6” x 1.91” x 5.5” in the upper right, and 2.85” x 2.44” x 7.625” in the middle right side.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
The 3i-2011-10SN was designed to fit the Sony HXR-NX800 or PXW-Z200 Camcorder. The interior of the case is made from high quality EPE foam that holds the camera with or without the battery installed, and features additional space for the BC-U2A battery charger, PTD-FP1 data transmitter, two batteries, and four accessory compartments. The battery slots fit the BP-U35, BP-U70 or BP-U100 (using precut pull-out foam blocks). The accessory pocket measures 1.8” x 1.8” x 1.75” in the upper left of the case, 8.09” x 1.47” x 7.625” in the bottom left, 6” x 1.91” x 5.5” in the upper right, and 2.85” x 2.44” x 7.625” in the middle right side.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
Original: $424.99
-70%$424.99
$127.50Description
The 3i-2011-10SN was designed to fit the Sony HXR-NX800 or PXW-Z200 Camcorder. The interior of the case is made from high quality EPE foam that holds the camera with or without the battery installed, and features additional space for the BC-U2A battery charger, PTD-FP1 data transmitter, two batteries, and four accessory compartments. The battery slots fit the BP-U35, BP-U70 or BP-U100 (using precut pull-out foam blocks). The accessory pocket measures 1.8” x 1.8” x 1.75” in the upper left of the case, 8.09” x 1.47” x 7.625” in the bottom left, 6” x 1.91” x 5.5” in the upper right, and 2.85” x 2.44” x 7.625” in the middle right side.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
